Back to Blog

Engineering Plastic Drying: A Production Checklist

Engineering Plastics

Published by SailinChem.

How should a resin drying procedure be specified?
Use the exact grade's preparation instructions and verify the material's condition when it reaches the machine. Drying temperature and time are only part of the procedure: storage, dryer performance and transfer exposure also need control. Surface appearance alone cannot verify moisture condition for every engineering resin.

Start with the grade instructions

Obtain the supplier's drying temperature, time and moisture guidance. Confirm the recommendations apply to the actual filled, colored or modified grade. Avoid carrying a drying recipe from a different polymer into a new trial just because the pellets look similar.

Check the whole material path

Record dryer performance, material residence time and exposure after drying. An open transfer route or a partly filled hopper can change the condition of material reaching the machine. Investigate the handling system as well as the dryer when moisture-related defects recur.

Verify rather than assume

Where moisture measurement is required, use a method appropriate to the material and train operators in sampling. Connect the result with the lot and processing run. Surface appearance alone is not a reliable approval method for every moisture-sensitive engineering polymer.

Details to prepare

  • Current grade-specific drying instructions
  • Dryer, transfer and hopper records
  • Moisture measurement method and release criteria

Related technical reading: BASF: Ultramid Polyamide Product Brochure.

Related guides and materials

Browse the Engineering Plastics catalog or prepare a request with the plastic material RFQ checklist.