Published by SailinChem.
When should an engineering-plastic dimension be measured?
Measure at the state relevant to acceptance and use, with the elapsed time, temperature and humidity specified where needed. Record tool cavity and material lot. Freshly molded and conditioned parts can produce different inspection results, so a target dimension needs a defined measurement procedure.
Define the measurement state
Record conditioning time, temperature and humidity where they influence the application. Use a drawing that identifies the truly functional dimensions. This prevents disagreements caused by one team measuring fresh parts while another measures parts after storage or assembly.
Separate sources of variation
Material, tool temperature, packing, cooling and part geometry can all influence the result. Compare measurements from a controlled trial before changing the resin. Keep cavity identification where a multicavity tool is used, so a tool-specific issue is not hidden by an overall average.
Build a useful acceptance record
Measure retained samples at the agreed stages and test the assembled product where fit is critical. Define how a supplier or process change will be assessed. A dimensional specification becomes more useful when it describes the measurement procedure as well as the target number.
Details to prepare
- Functional dimensions and measurement method
- Conditioning and elapsed time before inspection
- Cavity, material lot and process traceability
Related guides and materials
- Plastic Part Warpage: A Controlled Troubleshooting Plan
- Plastic Temperature Ratings: Continuous vs Short-Term
Browse the Engineering Plastics catalog or prepare a request with the plastic material RFQ checklist.